F-14D Super Tomcat

Scale 1/48
Skill Level 2 plastic model kit by Revell-Monogram
The latest version of the F-14 is the 'D' model. It offers the best mix of air-to-air weapons available to any fighter in the world and has an excellent combination of speed, range and agility. Features: New NACES seats, new GE-F110 engines and all new avionics nose, waterslide decals.

RMX4729 - $19.95

$16.99

F-14C Tomcat SnapTite®

Scale 1/72
Skill Level 1 SnapTite® Plastic Model Kit by Revell-Monogram
This carrier-based aircraft is programmed for automatic control of its swing wings. Features: Easy snap-together construction, parts molded in color, special decal sheet with one set of authentic markings and a bonus set of custom graphics such as lightning bolts and shark jaws.

RMX1180 - $14.95

$12.95

F-14B Tomcat

Scale 1/48
Skill Level 2 plastic model kit by Revell
High-quality plastic parts molded with the highest level of detail and accuracy. Armament options included AIM-54 Pheonix missiles, AIM-9. Sidewinders, AIM-7 Sparrow Ills, 2000lb. JDAM bombs, 500lb. LGB bombs and 500lb. Mk-82 bombs. Seated pilot or standing figures of pilot and radar officer plus two fuel tanks. Molded in light gray and clear. Illustrated assembly guide.
Length: 15-9/16". Wingspan: 15-13/16". Glue & paint required (Not included).

RMX855525 - $26.95

$22.95

F-14A Tomcat VF84 Jolly Rogers - Visible

Plastic Model Kit by 4D Vision.
167 pre-colored pieces. Includes fact guide and step-by-step illustrated assembly instructions. Features detailed interior, engines, detailed internal structure and components. 1/32 scale - 23 1/2" long. Assembly required. Ages 14 and up. Skill level 3 - for experienced modelers.

FDV26121 - $139.95

F-14A Tomcat

Scale 1/48
Skill Level 2 plastic model kit by Revell-Monogram
The Navy's most powerful fighter has flew from the decks of the U.S. fleet for almost 30 years. This Revell kits includes Phoenix missiles and extended crew ladder. Features: Upgraded to A-plus specs, authentic fleet markings.

RMX5803 - $19.95

$16.99

F-117A Stealth SnapTite®

Scale 1/72
Skill Level 1 SnapTite® Plastic Model Kit by Revell-Monogram
After many years of mystery, one of the best kept secreats of the U.S. Air Force was unveiled in 1990. The Stealth Fighter is designed to evade enemy radar detection and has proved very successful in recent overseas conflicts. Features: Easy snap-together construction, parts molded in color, special decal sheet with one set of authentic markings and a bonus set of custom graphics such as lightning bolts and shark jaws.

RMX1182 - $14.95

$12.95

F-106 Delta Dart

Scale 1/48
Skill Level 2 plastic model kit by Revell-Monogram
Known as the "ultimate interceptor," the F-106 Delta Dart remains the most advanced U.S. Air Force fighter designed specifically as an interceptor. Deployed in fighter interceptor squadrons to protect the United States from attack by Soviet bombers, the F-106 used a Hughes fire control system to locate its targets in any weather, day or night. The Semi-Automatic Ground Environment (SAGE) system linked the interceptor with ground radar and control systems to direct it to its target. It was armed with infrared and radar-guided Falcon missiles as well as an unguided Genie rocket which carried a nuclear warhead. Later Delta Darts could be armed with a six-barrel 20-mm cannon.

RMX5847 - $19.95

$16.99

F-101 Voodoo

Scale 1/48
Skill Level 2 plastic model kit by Revell
Injection molded plastic parts, beautifully scribed with realistic surface details. Landing gear bays complete interior detail with all the plumbing! Removable and exquisitely detailed armament bay door. Detailed speed brakes and landing struts. Outstanding tandem cockpit detail! Highly detailed pilot figures. Realistically rendered missiles and drop tanks. Waterslide decals. Illustrated assembly guide.
Length: 17-3/4".Wingspan: 10".Glue & paint required (Not included).

RMX855853 - $19.95

$16.99

EF-111A Raven

Scale 1/72
Skill Level 2 plastic model kit by Revell
The EF-111A Raven was developed for the electronic warfare role. The Raven has the combined agility of a fighter, the payload of a bomber, and the electronic counter measures (ECM) equipment of a jammer. It is equipped with an ALQ-9E jamming system which has the ability to pickup, identify, and neutralize hostile radars over a wide range of frequencies.

• Detailed cockpit and landing gear.
• Pivoting swing-wings.
• Authentic markings for 66-0044 "Straight Flush" 27th fighter wing, Cannon AFB, New Mexico and 66-0013 "Yankee Air Pirate" 27th fighter wing, Cannon AFB, New Mexico

RMX855480 - $17.95

$15.29

Douglas A-26 A/B Invader

Plastic Model Kit by Italeri
The Douglas A-26 entered the Second World War at a relatively late date: the first eighteen examples were, in fact, sent to the European front in the summer of 1944. However, shortly afterwards, the Invader demonstrated its worth, and on the cease fire the troops equipped with these planes had flown more than 11,000 missions. Also in the Pacific, in only a few months, the Invader consolidated its fame as the crew’s favourite bomber. After a short period of time, the A-26 found itself fighting again in Vietnam. It then became the average standard bomber of the USAF used in the War in Korea. It was in this conflict that the A-26C variant was more widely used; characterised by P&W R-2800-27 engines and a glass nose, which contained the Norden bombsight. Many examples were successively supplied to smaller air forces, which kept them in service until the middle of the 70’s.
Kit features cockpit including control panel, realistically molded engine nacelles, detailed landing gear. Waterslide decal markings included for:
1: A-26B-552nd BS, 386th BG, Beaumont, France 1944
2: A-26B-554th BS, 386th BG, France 1945
3: A-26B-86th BS, 47th BG, 12th Air Force, Italy 1945
4: A-26B-670th BS, 416th BG, France 1945
Scale 1/72. Length 8". Skill level 3. Glue and paint required (not included).

ITA1274 - $32.00

$27.49

Dehavilland Beaver on Floats

Scale 1/48
Skill Level 3 Kit by Hobbycraft
FEATURES: Each plastic piece has molded-in details for a realistic appearance. Precise moldings. Detailed cockpit and landing gear. Fuselage is clear plastic. Decals for: DHC Beaver, Harbour Air Airlines 1999; L-20A Beaver , US Army Korea 1964; DHC Beaver, Royal Australian Air Force 1954; L-20A Beaver, Peruvian Air Force 1969. Pictorial instructions.

HCCS1674 - $41.99

DeHaviland Beaver with Skis or Wheels - Vietnam

Scale 1/48
Skill Level 3 Kit by Hobbycraft
FEATURES: Detailed 1/48 scale model for static display. Fuselage is clear, while the rest of the parts are molded in gray. Features recessed panel lines on wings and fuselage. Authentic cockpit area. Detailed landing gear with choice of wheels or skis. Viet Nam Beaver can be built in different versions - the U-6A and L-20A. Waterslide decals. Pictorial instructions.

HCCS1675 - $41.99

Corsair F4U-4

Scale 1/48
Skill Level 2 plastic model kit by Revell
The Corsair, single place Navy fighter, was the last propeller-driven fighter made in the U.S. Unique in appearance with its inverted gull wing shape, it was designed for carrier operation but was flown from Pacific airstrips by Marine Corps pilots and enjoyed a distinguished postwar career in Korea.
Length: 8". Wingspan: 10-1/2". Glue & paint required (Not included).

RMX855248 - $15.95

$13.79

CH/HH-46D Sea Knight US Navy

Plastic Model Kit by Academy
Intricately detailed kit features hub and twin rotor assemblies, detailed cockpit and cargo compartment with choice of troop seats or Medevac litters, machine guns and stowage box. The rear loading ramp and door as well as the side crew entry door can be fixed in the open or closed position. Includes detailed landing gear, beacon, antenna, rescue winch and cockpit protective armor. Two Decal Sheets with Markings for 4 U.S. Versions:
1: HC-11 "Gunbearers" Det-2 #150957 USS Camden (2003)
2: #153404 N.A.S. Pt. MUGU (Oct 1989)
3: #153405 HC-8 "Dragon Whales" DET-2 Norfolk Naval Air Station
4: #151924 SOMS Kaneohe Bay (April 1982)
Scale: 1/48. Fuselage Length: 11". Skill level 3. Glue and paint required (not included).

ACY12207 - $55.00

$46.75

CH-46E Chinook Bull Frog

Plastic Model Kit by Academy
Features engraved panel lines and rivet details, detailed cockpit interior, clear windscreen, interior fuselage with troop seats or litter, detailed hub and rotor assembly, landing gear. The rear loading ramp may be modeled in open or closed position. Includes waterslide decals for 3 Marine Versions:
1: Squadron-1 "Nighthawks", Bu 157681, MCB, Quantico, VA
2: Squadron 162 "Golden Eagles", Bu 157713, MCAS, New River, NC
3: Squadron 261 "Raging Bulls", Bu 153369, MCAS, New River, NC
Scale 1/48. Fuselage Length: 11.25". Skill level 3. Glue and paint required (not included).

ACY1226 - $55.00

$46.75