Mazda Euros (MX-5 Miata) Roadster

Plastic Model Kit by Tamiya
The Eunos Roadster is powered by a normally-aspirated 116 horsepower 1.6 liter, DOHC, 16 valve, incline four cylinder engine with electronically controlled fuel injection and ignition. The rear-wheel driven Eunos Roadster had the ideal 50/50 weight distribution when fully loaded, providing excellent handling. The contours of it's body are smoothly rounded, from the oval air intake in front to the distinctive taillights. It was designed from the outset as a convertible, and allowed the engineers to concentrate on creating a highly rigid open body structure, avoiding much of the chassis flex usually experienced with convertibles. The Eunos Roadster will certainly be the prize possession of those who own and drive it.
Scale: 1/24. Glue & Paint Required (not included)

TAM24085 - $16.50

$13.19

Mclaren MP4/6 Honda

Plastic Model Kit by Tamiya
The McLaren MP4/6 Honda debuted at the United States Grand Prix, opening round of the 1991 Formula One season. Instead of the widely used high-lift nose, it featured a thin, linear front section and high side pontoons sporting oblong radiator air intakes. Front wing-tips featured cylindrical vortex generators to provide smooth airflow and effective down force. Featuring front/ rear push-rod suspension and hydraulic dampers with internal sensors, the car�s damper movement and engine operation were monitored by a telemetry system and could be analyzed in the pit. The six-speed transverse gearbox and RA121E V12 Honda engine featured output of 780hp. The superior design and high-powered engine enabled the MP4/6 and driver Ayrton Senna to take 4 straight wins at the U.S., Brazil, San Marino and Monaco GPs, followed by victories at Hungary, Belgium and Australia, with driver G. Berger winning in Japan. Senna won the Drivers' Title and McLaren took the Constructors' Title in 1991.
Durable and accurately replicated die-cast metal suspension arms. Functional front & rear suspension features damper unit operated by bell crank. Cockpit instrument panel, shift knob, pedals and seat belt shoulder pad are all accurately reproduced. Accurately detailed V-12 engine, transverse gearbox and monocoque frame. Removable cowling allows display of interior of car. Turning steering wheel actually moves front wheels Includes markings and cowl screens for No.1 Senna and No.2 Berger.
Scale: 1/12 Length: 14-1/2" Width: 7". Glue & Paint Required (not included)

TAM89721 - $286.00

$227.99

Mercedes Two-Seater Race Car 1914

Plastic Model Kit by Lindberg
1:16 Scale. Skill Level 2-requires paint and glue (not included).

LND72338 - $17.99

Mercedes-Benz SLR McLaren 1/24

Plastic Model Kit by Tamiya
This 195mm long model impressively reproduces the SLR's elongated form, which is enabled by its front-mounted engine, a rarity among super sports cars. Accents such as front hood fin, and horizontal fins on fender slits are depicted by separate parts. Internal mechanisms reproduced by separate parts include supercharger and engine air box, which are simple to attach yet add incredible realism. The luxurious interior exhibits minutely detailed seats and dashboard controls. Gloss and matte-type metal plated parts as well as metal transfers ensure high quality finish. After assembly, the Gull-wing doors feature working hinges with metal shafts for realistic and smooth opening. Metal stays allow doors to be posed in open position for full display of interior. The front hood also opens with 2-step hinge, for range of movement just like the real car, and allows display of exquisitely reproduced engine upper surface.
Scale: 1:24 Length: 7-5/8" Width: 3-3/8". Glue & Paint Required (not included)

TAM24290 - $68.00

$54.39

Mercury Cougar XR-7 Lowrider 1992

Plastic Model Kit by Revell Monogram
For those looking to transform their daily driver into a lowrider, but without the financial means to acquire a vintage subject from the 1960's, the rear drive Cougar provides an attractive substitute. Its long formal coupe styling lends itself well to the lowered stance of the modern lowrider. Features: Newly tooled padded vinyl top, lowrider wheels and tires, opening hood and coloful graphics. 1:25 Scale. Skill Level 2-requires paint and glue (not included).

RMX852182 - $22.95

$19.59

Mercury Custom Coupe 1949

Plastic Model Kit by Revell Monogram
This Special Edition ‘49 Mercury allows you to individualize your custom chopped top body car. You can design this model many different ways with all the features included in this kit. Requires paint and glue (not included).

RMX852860 - $24.95

$21.49

Mini Cooper 1275S Mk 1 1/24

Plastic Model Kit by Tamiya
Many people who visited the London Motor Show in October 1959 met an unfamiliar sight at the stand of Austin and Morris of the British Motor Company. It had a strange styling which was quite different from the current cars at that time; however most thought it was cute. They could not quite believe that this car could seat comfortably, four large British gentlemen or stout women, in a car that had a length of 3.05m and a width of 1.41m.
Complete engine detail. Authentic suspension, interior, and chassis. Detailed undercarriage. Waterslide decals include two sets of plates and circular dashboard reading panels, such as the speedometer. Authentic rubber-like treaded tires. Detailed pictorial instructions.
Scale: 1/24 Length: 4-3/4" Width: 2-1/4" Height: 1-3/4". Glue & Paint Required (not included)

TAM24039 - $18.50

$14.79

Mustang Boss 429 1970

Plastic Model Kit by Revell Monogram
The '70 Boss 429 Mustang showed just how important the high performance image was to Ford at the dawn of the 1970's. In sharp contrast to the well balanced Boss 302, Ford built the 429 with only one thing in mind - brute power. And moving from 0-60 mph in 6.8 seconds was all the proof anyone needed. Choice of custom mags, Magnum 500 wheels or custom 19" wheels with low profile tires. Dual 4 bbl. with high-rise manifold or stock engine. Skill Level 2-requires paint and glue (not included).

RMX852149 - $22.95

$19.59

2008 Mustang Bullitt

Plastic Model Kit by Revell Monogram
The 2008 Ford Mustang Bullitt is being produced to celebrate the fortieth anniversary of the famous Bullitt movie car. Ford is producing this special car as a limited edition with only 7700 being made. Features: Detailed 325 hp V8 with new cold air engine intake. Special five spoke wheels and grille with no chrome trim. Authentic factory stock detailing decals. Molded in white, silver, black and clear with chrome plated parts and black vinyl tires.
1/25 Scale. Skill Level 2-requires paint and glue (not included).

RMX854234 - $22.95

$19.79

Mustang Convertible 64 1/2

Plastic Model Kit by Revell Monogram
Introduced as it was smack in the middle of a model year, the first Mustang was the “1964-1/2”. Ever wonder where the term “pony car” came from? The original Mustang began as an industry-wide sensation in 1964, when two sporty new performance models were initially offered, a classy coupe and a convertible. There were 28,833 topless Mustangs built before the “actual” 1965 production began.
Features optional top up or top down, opening hood with detailed 289 cid V-8 engine, decals with authentic factory graphics. Skill Level 2-requires paint and glue (not included).

RMX852095 - $22.95

$19.75

Mustang Fastback 1965

Plastic Model Kit by Revell Monogram
When the Mustang coupe and convertible was introduced at the New York Worlds Fair in April of 1964, the automotive buying public went crazy for its stylish new long hood, short deck design. Less than a year later, Ford unleashed its fastback 2+2 body style, proving that lightning can indeed strike twice. Features: Newly restored stock parts, Ford 289 V8 engine, plenty of chrome accessories. 1:24 Scale. Skill Level 2-requires paint and glue (not included).

RMX852835 - $19.95

$16.99

Mustang GT 1968

Plastic Model Kit by Revell Monogram
Features opening hood with detailed V8 engine, optional Cobra Jet package and drag racing wheels, decals with authentic factory and period racing graphics, illustrated instructions. 1/25 Scale. Skill Level 2-requires paint and glue (not included).

RMX854215 - $22.95

$19.75

Mustang GT 2006

Plastic Model Kit by Revell Monogram
Much like it did when first introduced in 1964, Ford has hit another home run with the newly redesigned Mustang. The car is unquestionably modern yet also hints to the car's previous generations, as well. Stepping up to the GT model gets you a 4.6 liter V-8 with 300 horsepower and an upgraded suspension for tight handling. In fact, Ford almost can't produce them fast enough! Features: Newly tooled body, interior and chassis, detailed Ford modular V8 engine, accurate graphics. Skill Level 2-requires paint and glue (not included).

RMX852839 - $19.95

$16.99

1968 Bullitt Mustang GT

Plastic Model Kit by Revell Monogram
One of Steve McQueen's most famous films, 'Bullitt', features a wild, roller coaster chase scene through the streets of San Francisco, with Steve McQueen driving a '68 Mustang GT. The scene is probably the first major car chase ever used in a feature film and every movie car chase that has followed over the years owes allegiance to Steve McQueen for making it happen. Features: Opening hood with detailed V-8 engine. Custom five spoke magnesium wheels. Decals with authentic factory graphics. Molded in white, transparent red and clear with chrome plated parts and black vinyl tires.
1/25 Scale. Skill Level 2-requires paint and glue (not included).

RMX854233 - $22.95

$19.79

Mustang II

Plastic Model Kit by Lindberg
1:25 Scale. Skill Level 2-requires paint and glue (not included).

LND72169 - $17.99