Airbus A380 Visible Interior

Plastic Model Kit by Revell Germany
A new era of long haul passenger air travel was inaugurated in October 2007 with the entry into airline service of the A380. The A380 is the most advanced, spacious and eco-efficient airliner in service today. In a typical three-class, 525-seat configuration, it delivers noticeably more comfort while offering 40 per cent more capacity than the next largest airliner. This kit features a cutaway fuselage revealing the double-decker passenger compartment.
Scale 1/144. Length 19.75" Wingspan 21.75". Skill level 5. Glue and paint required (not included).

RVLS4259 - $88.75

$75.95

Antonov An-2 Colt

Plastic model kit by Revell Germany
The An-2's versatility has contributed to its lasting success. The N.V.A. used the An-2 as a naval interceptor during the Vietnam War, the An-2 was also a Soviet Air Force favorite until the country's collapse. Modern Europeans have discovered that the Colt's slow, steady performance makes it an ideal choice for crop dusting and skydiving. Kit features textured surfaces, a separate radial engine, a cockpit with seats and control columns, separate ailerons and operating hinges, aerials, a rotating propeller and decals for civilian, Soviet Air Force and N.V.A. aircraft.
Scale 1:72. Length: 177 mm. Wingspan: 252 mm. Skill level 3. Glue and paint required (not included).

RVL04667 - $36.25

$30.79

Beechcraft V35 Bonanza

Scale 1/72
Skill Level 2 Kit by Minicraft
When the unique Vee-tailed Beechcraft Bonanza first appeared, many fliers were startled when they realized there were only two tail surfaces, instead of the usual three. But Beechcraft’s engineers produced a successful design that eliminated the vertical fins that actually reduced drag and increased speed with the power available. The Bonanza became a popular private plane, somewhat in the category of a Cadillac or Lincoln of the sky. This model has a removable cowling and detailed engine. The cockpit interior, visible through the clear windows, contains the control columns, instrument panels and passenger seats.Colorful decals are matched to available model paints, and, of course, the model also has the Vee (or Butterfly) tail.

MMIS1609 - $17.99

Boeing 737-200

Plastic Model Kit by Revell Germany
The Boeing 737 made its maiden flight on 9th April 1967. This short-haul airliner, thousands of which have been sold to date, was to become the most succesful passenger aircraft of all time. Powerd by two Pratt & Whitney engines with 7,250 kp thrust, the 737 reaces a max. soeed of 580mph.
Kit features engraved surface details, landing gear optionally extended or retracted, authentic Boeing 737-200 engines, decals for British Airways.
Scale 1/200. Length 5.9" Wingspan 5.75". Skill level 2. Glue and paint required (not included).

RVL04232 - $9.25

Boeing 737-800

Plastic Model Kit by Revell Germany
The Boeing 737-800, built since 1998, is one of the safest and most successful commercial aircraft in the world. The model 800 offers accommodation for 184 passengers. Since May 2001 the Air Berlin 800s were re-equipped with winglets, that is upturned wing tips that enable it to climb more quickly and achieve a further 5% fuel economy.
Kit features engraved surface details, landing gear optionally extended or retracted, authentic Boeing 737-200 engines, decals for the Air Berlin version and also a Sobelair version.
Scale 1/144. Length 10.6" Wingspan 9.7". Skill level 2. Glue and paint required (not included).

RVL04202 - $14.50

Boeing 747

Plastic Model Kit by Revell Germany
The enormous Boeing 747 long-haul aircraft completed its maiden flight on 9.2.1969. The jumbo jet had Pratt & Whitney engines with 22,680 kp thrust, a take-off weight of over 660,000 lb and could carry 442 passengers over a distance of 5,700mi.
Kit features structurally detailed fuselage and wings, landing gear optionally open or closed, detailed engies and landing gear, decals for an Air Canada version.
Scale 1/390. Length 7.2" Wingspan 6.1". Skill level 2. Glue and paint required (not included).

RVL04210 - $9.25

Boeing 747-400

Plastic Model Kit by Revell Germany
When Boeing introduced the 747 series, they set new standards in aircraft construction ad revolutionides modern air transport. Innovations such as the doubling of the passenger or freight carrying capacity and quadrupling of the useful load, were made possible with the new generation, of jet engines with their much reduced fuel consumption. Following develpment work sinse 1960, the maiden flight took place in February 1969. The 747-400 carries 400 passengers and features an extended upper deck and longer wings. Its range is 6,500 miles. The CF6-80C2 engines deliver a thrust of 26.267 kgf.
Kit features structurally detailed surfaces, four CF-6 engines, detailed undercarriage, landing gear option (retracted or extended), structurally detailed wings
Scale 1/144. Length 19.3" Wingspan 18.2". Skill level 2. Glue and paint required (not included).

RVL04219 - $32.50

$27.95

Boeing 787 Dreamliner

Plastic model kit by Zvezda
The Boeing 787 is a newly conceived twin jet wide-body aircraft that demonstrates a new level of cost efficiency for the airlines. It is the first commercial airliner with a fuselage constructed mostly of carbon-fibre reinforced composite materials. Operating costs are 10% lower than those of a Boeing 767, achieved through lower fuel consumption and a 20% saving on weight. Two types of engine are available, the RR Trent 1000 and the GEnx. Its maiden flight took place on 15 December 2009. The airliners order list shows 840 orders for this revolutionary new commercial aircraft.
Kit features highly detailed plastic pieces molded in grey, two piece fuselage. Includes clear pieces for added detail. Comes with a clear display stand, waterslide decals, and illustrated instructions.
Skill Level 2. Scale 1:144 Length: 15 inches. Requires glue and paint (not included).

ZVE7008 - $33.69

$28.99

Boeing 787 Dreamliner

Plastic model kit by Revell Germany
The Boeing 787 is a newly conceived twin jet wide-body aircraft that demonstrates a new level of cost efficiency for the airlines. It is the first commercial airliner with a fuselage constructed mostly of carbon-fibre reinforced composite materials. Operating costs are 10% lower than those of a Boeing 767, achieved through lower fuel consumption and a 20% saving on weight. Two types of engine are available, the RR Trent 1000 and the GEnx. Its maiden flight took place on 15 December 2009.
Features:

• Finely structured surfaces with engraved panel joints
• Transparent parts for the window rows
• Detailed engine nacelles
• Finely detailed rotating front fan
• Detailed undercarriage
• A choice of extended or retracted undercarriage
• Display stand
• Detailed decal set for the 2nd Demonstrator Version with servicing markings and stencils

RVL80-4261 - $50.25

$42.49

Cessna 150

Scale 1/48
Skill Level 2 Kit by Minicraft
For many pilots, this was the first plane they learned to fly. Simple, forgiving, but just remember, keep the landing speed at 60 mph! (At least that’s what my instructor told me.) This model has a removable engine cowling, which allows you look at the detailed engine and accessories. You can see through the cockpit windows to view the instrument panel, controls and seats. The landing gear is covered by streamlined parts and, to finish it off, the decals offer a colorful red, yellow and black design.

MMIS1608 - $17.99

Cessna 172 Floatplane

Scale 1/48
Skill Level 2 Kit by Minicraft
Fully detailed interior-Everything from the flight controls and gauges down to the correct deluxe interior. Completely and correctly detailed engine with removable cowlings and built in air foil moguls. Minicraft’s acclaimed decal sheet includes complete aircraft ID numbers for North and South America, Asia, Europe and the UK. We are also including the complete livery stripes for ease of decoration.
Glue & paint required (not included).

MMI11634 - $27.99

Cessna 172 Tricycle Gear

Scale 1/48
Skill Level 2 Kit by Minicraft
Fully detailed interior-Everything from the flight controls and gauges down to the correct deluxe interior. Completely and correctly detailed engine with removable cowlings. Built in air foil moguls. Minicraft’s acclaimed decal sheet includes complete aircraft ID numbers for North and South America, Asia, Europe and the UK. We are also including the complete livery stripes for ease of decoration.
Glue & paint required (not included).

MMI11635 - $27.99

Concorde Snap Kit

Snap-together plastic model kit by Revell Germany
The world-famous airliner with its rocket-shaped fuselage is one of the most spectacular aircraft developments of the last few decades. The first flight took place on 2nd March 1969. Thanks to a top speed of about 2400 km/h, the flight from Paris to New York took less than three and a half hours.
1/288 scale. Skill Level: 2 Snap-together construction. Paint and glue not required.

RVLS6642 - $20.25

$18.79

DaVinci Aerial Screw

Plastic model kit by Elenco
The Aerial Screw designed by Leonardo da Vinci was a precursor of the modern day helicopter. The device was designed to compress air in order to obtain flight. The device uses a screw-shaped sail to drill in the air just as a screw drills into other materials. It consisted of a platform mounted by a helical screw driven by a rudimentary system similar to rubber band-powered model airplanes.
The scientific genius of Leonardo da Vinci is brought to life through this snap-together replica and is taken from the pages of da Vinci's priceless and awe-inspiring notebooks. Made of plastic and requires no special tools. The educational instruction manual teaches how DaVinci's inventions have evolved into what they are today. Assembly required.

ELEX6102 - $23.95

Embraer 170 Demonstrator

1:144 plastic model kit by Hasegawa
FEATURES: Highly detailed plastic pieces molded in white, gray and smoke. Display stand included. Illustrated instructions. Decal sheet with markings for 2 versions:

• Prototype No.5 Embraer 170 cn.17000005 PP-XJA
• Prototype No.4 Embraer 170 cn.17000004 PP-XJF

HSG10681 - $39.99

$33.99