R20/D/UM1 Battery Box w/Switch
For very experienced model builders.
This versatile "D" size battery box set can be used in-line with
no wiring necessary or with wire connections it can be used side by side. All
contacts are made from steel. Sturdy white plastic construction Pictorial
instructions are included.
REQUIRES: Assembly. Phillips Screwdriver. Hobby Knife. Adult Supervision.
TAMX0148 - $5.95
|
R14/C/UM2 Battery Box w/Switch
For very experienced model builders.
With the use of the 'C' Size Battery Box, using more than one in a series
is easy with the use of the special wireless connector. An easy-to-assemble
switch with reverse has also been included. Wiring cord is included along with
the special wireless connector.
REQUIRES: Assembly. Phillips Screwdriver. Hobby Knife. Adult Supervision
TAMX0149 - $5.95
|
R6/AA/UM3 Battery Box w/Switch
For very experienced model builders.
The 'AA' Size Battery Box Set can be assembled side by side or in-line. The
contacts are high quality to ensure proper connections. The switch with reverse
is made from durable plastic.
REQUIRES: Assembly. Phillips Screwdriver. Hobby Knife. Adult Supervision
TAMX0150 - $5.95
|
Four Channel Remote Control Box
For very experienced model builders.
This 2-Channel Remote Control Box will control two separate motors,
utilizing a self centering function that brings the control stick back to its
original position when released. The basic wiring has already been completed.
Simple assembly is all that is required. The wires are color coded for easy
wiring to motors. The battery case accepts either two AA or two C size
batteries depending on the desired power output and motors used.
REQUIRES: Assembly. Phillips Screwdriver. Two AA or C Cell Batteries.
Hobby Knife. Adult Supervision
TAMX8003 - $11.95
|
Four Channel Remote Control Box
For very experienced model builders.
Four motors can be controlled with this 4-Channel Remote Control Box. The
control sticks have a self-centering function which automatically moves them
back to the neutral position. Use with robotics projects or combine with items
from the Robotic Kits section to give them more functions. Switch plate is
factory assembled for easy installation. Self-centering levers add positive and
quick feel to the control. Blue plastic body. Detailed pictorial instructions.
REQUIRES: Assembly. Phillips Screwdriver. Two D Cell Batteries. Hobby
Knife. Adult Supervision
TAMX7100 - $15.95
|
Sound Activated Switch
Note: Quantities Limited.
For very experienced model builders.
The Sound Activated Switch is a highquality switch that utilizes a
condenser microphone to detect the sound of clapping or other sharp sounds to
activate it. The switch comes pre built and is powered by a 9V battery (not
included). The switch can be wired in several ways to change the on and off
functions.
Capacity:4A
Functions: On/off
REQUIRES: 9V Battery
TAMX7512- $24.95
|
DPDT Toggle Switch
For very experienced model builders.
Set this switch up for a variety of functions. Uses 6V and a capacity up to
5A.
SPECS: Length: 1/2" (1.3cm) Width: 1/2" (1.3cm) Height:
1-1/8" (2.9cm)
Capacity: 5A.
Functions: On/off/on
TAMX7517 - $4.95
|
DPST Slide Switch (2)
For very experienced model builders.
This is a two-position switch, on/off. Uses 6V and up to a 4A capacity,
this switch works well in low power applications.
SPECS: Length: 7/8" (2.22cm) Width: 1/4" (6.35mm) Height:
3/4" (1
.91cm)
Capacity: 4A.
Functions: On/off
TAMX7515 - $1.95
|
4 Amp Micro Switch
For very experienced model builders.
Set this switch to turn on when the switch button is depressed and turn off
when the button is released, or set it up the opposite way. Uses 6V and up to
4A capacity.
Length: 3/4" (1.91cm) Width: 1/4" (6.35mm) Height: 5/8"
(1.59cm)
Contacts: Steel
Capacity: 4A
Functions: On/off
TAMX7516 - $2.95
|
|
16 Amp Micro Switch
For very experienced model builders.
This high-capacity switch handles up to 16A. Similar to the switch used in
the Wall Hugging Mouse kit. This switch can be wired to turn on when the switch
button is depressed and turn off when it is released, or it can be wired to
turn on when the switch button is released and turn off when it is depressed.
Length: 1-1/8" (2.9cm) Width: 5/8" (1.6cm)
Capacity: 16A
Functions: On/off
TAMX7510 - $6.95
|
|
