Viking Ship

Easy to build and designed for ages 10 and up. Single masted sailing ship with paper sails. Pre-formed wood hull. All wood construction. Includes everything needed to build the kit: Preformed wood hull, paper sails, paint, paint brush, glue, oars, decal placement sheet, instructions for cutting out and recognizing pieces.

Length: 9.6 in (24.5 cm)
Height: 6 in (15 cm)
Width: 5.5 in (14 cm)

CNSB4116 - $31.99

Schooner

Easy to build and designed for ages 10 and up. Two masted sailing ship with paper sails. Pre-formed wood hull. All wood construction. Includes everything needed to build the kit: Preformed wood hull, paper sails, paint, paint brush, glue, oars, decal placement sheet, instructions for cutting out and recognizing pieces.

Length: 11 in (28 cm)
Height: 10.75 in (27.5 cm)
Width: 2 in (5 cm)

CNSB4118 - $31.99

Santa Maria

Easy to build and designed for ages 10 and up. Three masted sailing ship with paper sails. Pre-formed wood hull. All wood construction. Includes everything needed to build the kit: Preformed wood hull, paper sails, paint, paint brush, glue, oars, decal placement sheet, instructions for cutting out and recognizing pieces.

Length: 9.5 in (24 cm)
Height: 8.25 in (21 cm)
Width: 4 in (10 cm)

CNSB4120 - $31.99

Bounty

Easy to build and designed for ages 10 and up. Three masted sailing ship with paper sails. Pre-formed wood hull. All wood construction. Includes everything needed to build the kit: Preformed wood hull, paper sails, paint, paint brush, glue, oars, decal placement sheet, instructions for cutting out and recognizing pieces.

Length: 10 in (25.5 cm)
Height: 9.25 in (23.5 cm)
Width: 3.2 in (8 cm)

CNSB4121 - $31.99

Baltimore Clipper

Easy to build and designed for ages 10 and up. Two masted sailing ship with paper sails. Pre-formed wood hull. All wood construction. Includes everything needed to build the kit: Preformed wood hull, paper sails, paint, paint brush, glue, oars, decal placement sheet, instructions for cutting out and recognizing pieces.

Length: 11.5 in (29 cm)
Height: 9 in (23 cm)
Width: 3.3 in (8.5 cm)

CNSB4122 - $31.99

"Indian Girl" Canoe Kit

Designed for the Intermediate to Advanced Modeler.
Designed by J. H. Rushton, America's premier canoe builder. Shown painted black on the outside and natural wood along the top edge and on the inside of canoe.
FEATURES: Midwest Micro-Cut Quality basswood, cherry and mahogany parts. Cleanly pre-cut parts, including forms, strongback, stems, decks and Ribs. Flexible basswood planking strips. Fabric seats and brass stem band. Full-sized rolled plan. Illustrated step-by-step construction manual.
INCLUDES: Strongback. Cherry seats, inwales, gunwales. Fifty planks. Two cherry thwarts. Brass stem band. Seat fabric. Plan sheet. 16-Page constructon manual.
REQUIRES: Instant (thin CA) and slow setting (thick CA-). CA accelerator. Water-based white glue (Optional adhesive instead of Cyanoacrylates). Paints. Sanding blocks and sandpaper. 18" steel straight edge. Small square. Straight pins. Razor saw.
SPECS: Length Overall: 16" (406mm). Beam: 2-3/4" (70mm). Height: 2" (51mm). Scale: 1"=1' (1:12).

MIDB1981 - $43.99

Peterborough Canoe Kit

Designed for Intermediate to Advanced Modelers.
There was a time in the late 19th and early 20th centuries when "a PETERBORO" meant almost any wooden canoe in the traditional Canadian style, that is, one basically having the appearance of the woodland bark canoe of the North American Indian. Canoe is pictured with a smooth natural wood color and brown to dark brown stipes that run the full length of the canoe.
FEATURES: Micro-Cut Quality basswood, cherry and mahogany parts. Cleanly pre-cut parts, including forms, strongback, stems, decks and ribs. Flexible basswood planking strips. Fabric seats and brass stem band. Full-sized rolled plan. Illustrated step-by-step construction manual that assures success.
INCLUDES: Gunwales. Deck cap set. Strongback. Cherry floor blanks. Mahogany planks. Plank set. Rib set. Plans sheet. 16-page instruction manual.
REQUIRES: Instant (thin CA) and slow setting (thick CA-) glues. CA Accelerator. Water-based white glue (Optional adhesive instead of Cyanoacrylates). Paints. Sanding blocks and sandpaper. 18" steel straight edge. Small square. Straight pins. Razor saw.
SPECS: Length Overall: 15-7/8" (403mm). Beam: 2-5/8" (67mm). Height: 1-1/2" (38mm). Scale: 1"=1' (1:12).

MIDB1982 - $43.99

Cheasapeake 17 Kayak Kit

Designed for persons with no prior building experience.
Indigenous Arctic cultures relied upon their sealskin covered kayaks for hunting and traveling in cold, dangerous waters.
FEATURES: All wood model consists of Lite-Ply, Basswood, and Birch plywood construction. Laser cut frames and cockpit coaming. Pre-shaped bow and stern blocks. Photo-etched brass buckles. Ribbon and elastic thread for hatch straps, bungies and felt for seat cushions.
INCLUDES: One Midwest Chesapeake 17 Wooden Sea Kayak Static Model Kit with, rolled plan sheet, instruction manual, all fittings, dowels, wood and fasteners.
REQUIRES: Building tools, paint, white glue, CA glue,
SPECS: Length: 17" (430mm) Beam: 2" (51mm) Height: 1-3/16" (30mm) Scale: 1"=1' (1:12)

MIDB0989 - $48.99

"Dominica" Schooner Kit

1/88 Scale "8-Hour" Plastic & Wood Kit

With their illustrated instructions, 8-Hour kits can be assembled by anyone, even modelers with no previous building experience.

• The prepainted hulls are made of high-impact polystyrene; all other parts are Constructo-quality wood and brass.
• Lots of scale touches make these models ideal for display.
• All kits measure 15.1 x 3.0 x 9.2 in (430 x 85 x 260 mm).

CNSB5165 - $69.99

"Swift" Sailing Ship Kit

1/75 Scale "8-Hour" Plastic & Wood Kit

With their illustrated instructions, 8-Hour kits can be assembled by anyone, even modelers with no previous building experience.

• The prepainted hulls are made of high-impact polystyrene; all other parts are Constructo-quality wood and brass.
• Lots of scale touches make these models ideal for display.
• All kits measure 15.1 x 3.0 x 9.2 in (430 x 85 x 260 mm).

CNSB5166 - $69.99

"Virginia" Schooner Kit

1/80 Scale "8-Hour" Plastic & Wood Kit

With their illustrated instructions, 8-Hour kits can be assembled by anyone, even modelers with no previous building experience.

• The prepainted hulls are made of high-impact polystyrene; all other parts are Constructo-quality wood and brass.
• Lots of scale touches make these models ideal for display.
• All kits measure 15.1 x 3.0 x 9.2 in (430 x 85 x 260 mm).

CNSB5167 - $69.99